{"product_id":"dirty-down-rust-effect-25ml","title":"Dirty Down Rust Effect - 25ml","description":"\u003cp\u003eApply rust paint by brush or airbrush\/sprayer. Rust effect paint looks best when applied to rough, textured surfaces.Simulate atmospheric oxidisation of aged metals effortlessly. Water soluble to easily tone back effects for the perfect result.Usage Instructions:\u003c\/p\u003e\n\u003cp\u003eThepot and surface should be atroom temperature or warmer before use. The rust colour may not appear if the pot and\/or the surface are very cold.\u003cbr\u003e\nThe mixture will settle on the bottom of the pot. It’s very important to thoroughly shakethe pot with the ball bearings rattling before each and every use. Thoroughly stir the mixture and ensure that solids on the bottom of the pot are fully mixed into the liquid. Repeat stirring and shaking until all lumps have gone. It’s much better to shake and stir rust paint when the pot is at room temperature or warmer. If the pot is cold it may not be possible to fully mix any solids into the liquid.\u003cbr\u003e\nUse rust paint straight from the pot.Replace the lid quickly during use to prevent the liquid from evaporating or decant what you need to use for a job into a separate smaller pot\/container with a lid.\u003cbr\u003e\nDo not add water into the paint pot – this may prevent the colour from forming.\u003cbr\u003e\nEnsure surfaces are clean, dry and grease free.Test the paint on hidden surfaces before use to ensure compatibility and adhesion.\u003cbr\u003e\nOnly apply to non-porous surfaces such as plastic and metal. Do not apply to porous\/absorbent surfaces such as bare timber or paper. Rust paint can be applied to painted surfaces, but test first. If the effect does not form, try first sealing the surface with varnish.\u003cbr\u003e\nRust paint iswater soluble and the effects of painting will be lost by washing in water or by getting wet, but there may still be staining. Do not expose rust paint to rain or splashing with water.\u003cbr\u003e\nRust paint looks best when applied to a rough surface.\u003cbr\u003e\nTofill dents and groovesin surfaces, first cover the surface with rust paint, and then wipe the paint off the raised areas with a damp cloth (at an angle to the grooves), leaving some of the paint trapped. The wetter the cloth, the more paint removed.\u003cbr\u003e\nWhen fully dry, rust paint can be made more permanent by spraying with fine\/mist coats of acrylic varnish\/lacquer. Test varnish first because types of varnish change the colour\/shade of the paint.\u003cbr\u003e\nWhen dry, avoid scuffing\/scratching the finished paintwork. \u003c\/p\u003e\n\u003cp\u003eFor the best results it’s best to practise different techniques listed below before final use.\u003c\/p\u003e\n\u003cp\u003eTo darken the shade apply more coats. Allow each coat to fully dry before applying another. Any number of coats of rust paint can be applied over the top of each other. For a broken, patchy effectapply to small areas\/patches at a time and allow to dry – more in some areas, less in others.\u003cbr\u003e\nThe shade will vary depending on the quantity applied. A thick coat of paint will dry a darker shade, and a thin coat of paint will dry alightershade.\u003cbr\u003e\nFurther variations in shade can be created by dabbing a damp or wet brush, cloth or tissue onto the painted surface and then leaving to dry. As the water dries, the dye in the paint separates into shades of light and dark rust. The more water used, the greater the effect. This technique can be used after the paint has dried or while it is still wet. Another option is to simply splash water onto the rust paint and leave to dry – without dabbing.\u003cbr\u003e\nFor a very dark shade, decant a small amount into a separate pot and allow the paint to evaporate. The more the paint evaporates, the thicker and darker the paint gets (may not be possible to spray if too thick). \u003c\/p\u003e\n\u003cp\u003eBrush Application\u003c\/p\u003e\n\u003cp\u003eDip the brush and immediately apply to the surface. For a patchy effect dab the paint onto a surface and keep dabbing in the same place until the paint dries. Any number of coats can be applied in this way. For a more even effect paint an even coat onto a surface.\u003cbr\u003e\nA different rust effect is obtained depending on whether a soft or stiff brush used to apply the paint.\u003c\/p\u003e\n\u003cp\u003eFine Soft Brush: For very detailed work. Apply a small amount to the brush and apply directly to the surface.\u003cbr\u003e\nLarger Soft Brush: For apply larger amounts to larger areas. For a darker shade apply larger quantities and for lighter shades apply smaller quantities.\u003cbr\u003e\nStiff Brush: Very light shades can be obtained by dabbing a very small quantity of rust paint onto a surface using a stiff brush. Allow rust paint to dry slightly on the brush for a very light effect, similar to the “dry brushing” painting technique. \u003c\/p\u003e\n\u003cp\u003eAlways clean the brush in water straight after use. Do not let rust paint fully harden onto brush. If for any reason rust paint has dried onto a brush, soak the brush in methylated spirits to fully clean, (but check first that this will not damage the brush). \u003c\/p\u003e\n\u003cp\u003eCloth\/Tissue Application\u003c\/p\u003e\n\u003cp\u003ePour on a cloth or tissue and dab onto a surface and keep dabbing in the same place until the paint dries.\u003cbr\u003e\nFor a light shade apply a small amount at a time. For a darker shade apply a larger quantity. \u003c\/p\u003e\n\u003cp\u003eSpray Application\u003c\/p\u003e\n\u003cp\u003eSpray rust paint onto a surface straight from the pot using an air brush orpressure pot spray gun. Clean air brush immediately after use. \u003c\/p\u003e\n\u003cp\u003eRust Effect is water soluble. Rust Effect can be wiped off surfaces in two ways (even when fully dry):\u003c\/p\u003e\n\u003cp\u003eUsing a damp cotton bud.\u003c\/p\u003e\n\u003cp\u003eOnly dampen one end of the cotton bud.\u003cbr\u003e\nWipe rust paint with the damp end first, and then with the dry end.\u003cbr\u003e\nThe wetter the cotton bud, the more rust paint is removed. \u003c\/p\u003e\n\u003cp\u003eUsing a sheet of kitchen roll (absorbent paper towel).\u003c\/p\u003e\n\u003cp\u003eFirst apply rust paint onto the panels so that they are fully covered, and leave to dry.\u003cbr\u003e\nFlatter one end of a piece of kitchen roll, and dip this end into water.\u003cbr\u003e\nRemove most of the water from the flat end so that it’s only slight damp. This can be done by pushing the flat end against other dry pieces of kitchen roll.\u003cbr\u003e\nGently press the damp flat end of kitchen roll against the dried rust paint, and twist the kitchen roll.\u003cbr\u003e\nKeep the kitchen roll in one place, do not wipe side to side across the surface. Some rust paint is left on the model and some removed. Some rust paint will have been wetted by the damp kitchen roll and will change shade to look darker, just like old rust.\u003cbr\u003e\nThe wetter the rust paint gets, the darker the shade. Practice first to check how damp the kitchen roll should be and how much pressure to apply. \u003c\/p\u003e\n\u003cp\u003eCreate different shades of rust using water:\u003c\/p\u003e\n\u003cp\u003eApply rust paint to a surface.\u003cbr\u003e\nApply a small amount of water to the rust paint and either allow to dry on its own, or dry by dabbing with a piece of kitchen roll or tissue. This usually causes the colours to separate and dry different shades and more patchy.\u003cbr\u003e\nWater can be applied to the surface after the rust paint has fully dried or when the rust paint is still wet.\u003c\/p\u003e\n","brand":"Zatu Games","offers":[{"title":"Default Title","offer_id":56047605743994,"sku":"WAH-DDR25","price":8.49,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/9970\/8282\/files\/Dirty-Down-Rust-Effect-25ml.jpg?v=1760974418","url":"https:\/\/zatu.com\/products\/dirty-down-rust-effect-25ml","provider":"Zatu Games","version":"1.0","type":"link"}